Threaded rod DIN 976 M56x1000-8.8

Product detailed description

Threaded rod according to DIN 976, previously known as DIN 975, with dimensions M56x1000 mm, is made of steel of strength class 8.8. This rod has a metric thread with a diameter of 56 mm and a length of 1000 mm. The thread pitch is 5.50 mm, which is standard for this type of thread. The steel used to produce this threaded rod is without surface treatment, which means that it is not protected against corrosion and is suitable for use in environments where it is not exposed to corrosive influences or where additional surface treatment is planned according to specific project requirements.

The strength class 8.8 indicates that the material has a yield strength of at least 640 MPa and a tensile strength of 800 MPa, which guarantees high mechanical resistance and the ability to carry significant loads. This threaded rod is suitable for use in a variety of industrial applications such as structural connections, anchoring and fastening where high strength and reliability of the connections are required.

Due to the absence of a surface finish, it is important to consider the environmental conditions in which the rod will be used and possibly provide additional corrosion protection if necessary. This threaded rod is supplied in 1 meter lengths and is intended for use in applications where precise and reliable assembly is required with high demands on strength and stability.