Teroson VR 410 - 200 ml Fluid D surface seal non-hardening
Code: 981428
Related products
Product detailed description
Teroson Fluid D is a pasty, non-hardening, permanently plastic sealant based on synthetic resins. Thanks to these properties, the sealed parts can be assembled immediately or a few hours after applying Fluid - D and disassembled again later. It cannot be painted over. It is used to seal gearboxes and flat fixed seals on car units.Instructions for use:
- The contact surfaces must be degreased, cleaned and dry. disassemble after approx. 10 minutes.
- Assembly of parts is also possible after a few hours.
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Teroson Fluid D safety data sheet on request.
Henkel - Teroson Fluid-D - IDH: 800110 - Catalog number: 12692W Teroson Fluid D - 200 mlInstructions for use:
The contact surfaces must be degreased, cleaned and dry. The material is applied with a brush to one or both contact surfaces in a thickness of approx. 1 mm. The parts can be dismantled after approx. 10 minutes. The parts can also be assembled after a few hours.
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. The safety data sheet for Teroson Fluid D is available on request.
You can find this product in the following categories
- Adhesives and sealants
- Flange sealing adhesives
- For joints over 0.25 mm
- Sealants and silicones
- Resin sealants
- target="_blank">Adhesives and sealants
TEROSON® VR 410 is a blue, pasty resin-based sealant, particularly suitable as a supplement to flat seals on rough-machined surfaces. It withstands temperatures from -40 to +120 °C. It is applied with a brush or spatula and is easily removable, the product remains flexible and does not harden. resin-based, especially suitable as a supplement to flat seals on rough-machined surfaces. It withstands temperatures from -40 to +120 °C. It is applied with a brush or spatula and is easily removable, the product remains flexible and does not harden.
Additional parameters
| Category: | Adhesives and sealants > Adhesives for sealing flanges > For joints up to 0.25 mm |
|---|---|
| Weight: | 0.276 kg |
| EAN: | 4002872126921 |
| Color: | blue |
| Country of origin: | Netherlands |
| Manufacturer's brand: | Teroson |
| Číslo výrobce: | 800110 |
| Značení: | TEROSON VR 410, 200ml |
Be the first who will post an article to this item!