Teroson SB 2444 - 670 g contact adhesive for rubber

Terokal 2444 contact adhesive for rubber profiles and for firmly bonding compact and foam rubber materials, flexible foam materials, leather, felt and insulating materials (e.g. Terodom-SP 100 alu) with a brush or baking varnish). Key areas of application include bonding rubber and insulating boards to concrete, masonry, wood and steel. It is not suitable for bonding polystyrene foams and plasticized PVC. Most contact adhesives are based on polychloroprene. They show excellent initial strength and achieve high strengths on many substrate materials.

Teroson Terok

Contact adhesive Terokal 2444 for rubber profiles and for the firm bonding of compact and foam rubber materials, flexible foam materials, leather, felt and insulating materials (e.g. Terodom-SP 100 alu) to rubber, metal (untreated, coated). Key areas of application include bonding rubber and insulating boards to concrete, masonry, wood and steel. Not suitable for bonding polystyrene foams and plasticized PVC. Most contact adhesives are based on polychloroprene. They show excellent initial strength and achieve high strengths on many base materials.

Product information:

Density at 20°C: 0.9 g/cm3
Solids content: 30%
Drying time / Open time: 5 - 2 1465): 1.2 N/mm2
Peel strength: 22 N/cm
Temperature resistance: -40 to +80°C
Frost sensitivity: conditional
Shelf life: 12 months
Size Carton: 175g and 34 Properties:

high initial adhesion
good contact tack
joints are flexible and resistant to water and elevated temperature (90°C)
suitable for application with a brush, spatula or trowel
adhesive on polychloroprene

Parts bonded with Terokal 2444 should be joined together when the adhesive is dry, not wet, when lightly touched with a finger on the surface (so-called finger test). Teroson Terokal 2444 safety data sheet on request.