Teroson PU 9225 SF ME - 50 ml polyurethane two-component adhesive

Product detailed description

Teroson PU 9225 SF ME is a two-component polyurethane fast-curing repair adhesive. It is typically used for repairs on paintable interior and exterior plastic parts, especially for minor damage such as scratches or holes in bumpers, spoilers, covers, etc. The product can be cured using infrared light at 60°C. Easy to apply using the TEROMIX HAND GUN (50 ml cartridge) and a suitable static mixer. Teroson VR 10 is recommended for surface preparation. Loctite 587 is a high-performance, extremely flexible RTV silicone adhesive that has excellent resistance to automotive engine oils. Good adhesion to a wide range of base materials predetermines the use of Loctite 587 as: · replacement of classic gasket, · bonding of components in the automotive industry, · highly resistant gasket against engine oils, · temperature-resistant surface gasket up to 260 °C, · surface gasket (sealing) in the field of machine maintenance gasket. Loctite 587 surface silicone gasket is a one-component metallic blue paste, which increases the load-bearing capacity of the joint with its flexibility and absorbs shocks in the bonded area perfectly. Due to its excellent properties, Loctite 587 is the ideal silicone for the automotive industry and for all OEM operations. Due to its extreme resistance to oils, water and temperatures, Loctite 587 gasket can be shaped or replaced as a valve cover gasket, oil pan gasket, cylinder head gasket, seal water pumps, use it as a front gasket for the intake manifold, seal rear axles, etc. Loctite 587 Silicone is an excellent product for many automotive and industrial applications where high resistance to motor oils is required, but is not recommended for use in contact with gasoline! Highly flexible and durable sealants, gaskets and industrial adhesives with fast delivery. Technical parameters: · Maximum joint: 1 [mm ] · Non-stick surface in: 30 [min] · Full cure in 24 h: 2.5 [mm ] · Temperature resistance: - 55 to + 200 [°C] · Extrusion speed: 250 - 600 [g/min] 2] · Elongation at break: 300 [%] · Tensile strength: 1.6 [N/mm 2] · Shore hardness: 26 to 40 [A] Properties: · Chemical type: oxime silicone · Appearance: metallic blue paste · Ingredients: one-component · Viscosity Application: sealing or caulking · Flexibility: increases the load-bearing capacity of the joint and the ability to absorb shocks in the bonded area · Special application: gasket replacement or for flat gaskets · Special advantage: excellent resistance to automotive engine oils and good adhesion to a wide range of substrate materials