Teroson PU 9200 - 310 ml black body sealant

Product detailed description

Spoiler adhesive - Terostat 9200 (1K PUR) is a one-component polyurethane-based body sealant that hardens with air humidity as a permanently elastic adhesive and sealant. Adhesive and sealant for bonding and permanently elastic sealing of metals and plastics, particularly suitable for bonding body parts such as spoilers, protective strips, etc. It is characterized by high adhesion to raw, primed and painted substrates. After drying, it can be overpainted with all paints, stable, sandable, UV-resistant. It is used as an adhesive for spoilers - for visible and normal joints on front and rear cover plates, rear wall, engine compartments, luggage compartment floor, cabin floor, fuel tanks, mudguard, repainting of edges.

Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Teroson Terostat 9200 safety data sheet on request.

Henkel - Teroson Terostat 9200 - IDH: 1400356

Teroson Terostat 9200 black - 310 ml Terpón Terostat 9Pur 0 />
Terostat 9200 1KPUR is a one-component, solvent-free polyurethane-based body sealant that hardens with atmospheric moisture as a permanently elastic adhesive and sealant. Suitable for bonding and permanently elastic sealing of metals and plastics, particularly suitable for bonding body parts such as spoilers, protective strips. It is characterized by high adhesion to raw, primed and painted substrates. After drying, it can be overpainted with all paints, stable, sandable, UV-resistant.

Used as an adhesive for spoilers: for visible and normal joints on front and rear cover plates, rear walls, engine compartments, luggage compartment floor, floor in the driver's cabin, tank, mudguard, repainting of edges.

Not used for structural bonding
Also overpainted with two-component paints.
Can be painted and smoothed.
Overpainted with primers and fillers after hardening.
Primer cleaner + thinner FL

Properties:

High adhesion on raw, primed and painted substrates
Non-corrosive
Overpainted
Stable
Curing mechanism: 20-45 minutes
oil, dust, grease and other dirt. We recommend Teroson Cleaner-FL for cleaning, as other cleaners may contain alcohols, surfactants or amines, which can lead to incompatibility. noreferrer">Adhesives and sealants

• Adhesives and sealants Sealants and silicones
• Polyurethanes
• Single-component 9100 / 9200

  RoHS Search

  Contact Henkel

  Body Repair - Seam Sealing

  In all areas where sealing, bonding and quick repainting are required.
  Particularly suitable for bonding tuning accessories, e.g. spoilers, moldings, etc. Best applied with the PowerLine II gun.
  
  Benefits for you

  • Solvent-free
  • Good bead stability
  • Corresponds to the factory appearance of the original car finishes (brush structure)
  data
  • Product base: 1-component (1K) polyurethane
  • Tack-free in: approx. 35 min.
  • Paintable: After surface layer formation
  • Package size: Cartridge, white, 310 ml, Cartridge 1, grey ml

  Further information

  Terostat 9100 / 9200

  
  
  

  TEROSON® PU 9200 properties. Skin formation is in 35 min. Any type of piston-type dispensing gun can be used for application, e.g. the TEROSON® STAKU hand gun, the best results are achieved with the TEROSON® POWERLINE II air pressure gun or the TEROSON® MULTIPRESS telescopic air gun. TEROSON® VR 10 is recommended for surface preparation.

  
  
  TEROSON PU 9200
  Bodywork repairs - bonding: for all areas where bonding and sealing are required. One-component polyurethane, skin formation: 35 min.
  TEROSON® PU 9200 is a one-component polyurethane adhesive with excellent sealing properties. Skin formation is in 35 min. Any type of piston-type dispensing gun can be used for application, e.g. the TEROSON® STAKU hand gun, best results are achieved with the TEROSON® POWERLINE II air pressure gun or the TEROSON® MULTIPRESS telescopic air gun. TEROSON® VR 10 is recommended for surface preparation.