Teroson PU 92 - 310 ml gray, polyurethane adhesive

Product detailed description

Application areas:

Terostat PU 92 is used for flexible sealing and bonding, especially for sealing seams and narrow joints in the following areas:

• vehicle superstructures
• manufacture of railway wagons and containers
• manufacture of ships and boats
• manufacture of metal facades
• manufacture of air-conditioning and ventilation equipment

Terostat PU 92 is used in cases where Terostat PU 92 often replaces mechanical joining methods such as screws, rivets and welding. During hardening, the joint must be fixed. The advantage of Terostat PU 92 is that it simultaneously performs the function of a sealant and an adhesive. Terostat PU 92 is generally not suitable for structural joints. trowel

Adhesion:

Surfaces must be clean, dry, oil-free. To ensure good adhesion to, for example, glass, aluminum, stainless steel and plastics - ABS and PVC, we recommend using Terostat - 450 primer. Good adhesion is achieved without a primer to painted surfaces and wood. For raw sheets, it is recommended to roughen the surface. For materials not listed above, we also recommend performing a preliminary test. air guns). Air guns require a pressure of 2 to 5 bar. Low temperature of the sealant leads to an increase in viscosity, which is reflected in a reduced extrusion speed. This can be prevented by tempering the sealant before processing to normal temperature. Moisture condensation and dew may occur on substrates that are too cold. This must be prevented by tempering in time. Terostat - PU 92 can be smoothed using a spatula dipped in soapy water. To clean work tools from uncured material, use Cleaner - D.

Painting:

Terostat - PU 92 can be painted in an uncured state with one-component and two-component alkyd and acrylic paints. Curing is not stopped by repainting, only slowed down. Repair nitro varnishes in sprays or varnishes, thinners and accelerators containing alcohol are not compatible with Terostat - PU 92, they prevent its hardening.

Apply basic anti-corrosion coatings only to hardened Terostat - PU 92, putty. In the case of accelerating the hardening of the coating with an IR lamp or in an oven, the putty can be heated only after approximately 30 minutes, when the initial reactions subside. Uncured putty can be heated to a maximum of 90 ° C for one hour.

Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Safety data sheet Teroson Terostat PU 92 on request.

TEROSON® PU 92 is an adhesive that hardens by reaction with moisture on an elastic product.