Teroson PU 9100 - 310 ml gray body sealant
Code: 981517
Related products
Product detailed description
Teroson PU 9100
- Also available in package size: white cartridge 310 ml, gray cartridge 310 ml
Use:
- Putty and adhesive for bodywork repairs.
- Suitable for elastic joints and seals.
- Application in the interior and exterior of the vehicle.
- Can be painted and troweled.
Advantages:
- Quick repainting and UV resistance.
- Excellent adhesion without the need for a primer.
- Can be applied in a wide temperature range.
- Solvent-free.
- Good track stability.
- Corresponds to the factory appearance of the original car finishes (brush structure).
Product features:
- Color: Grey
- Odour: Odourless
- Product base: 1-component (1K) polyurethane
- Density: Approximately 1.2 g/cm?
- Tensile strength: Approximately 1.7 MPa
- Elongation at break: Approximately 350%
- Application temperature: 5°C to 35°C
- Temperature resistance: from -40°C to +90°C (+120°C for 3 hours)
- Resistance to bending: Very good
- Film formation time: Approximately 20 to 45 minutes
- Paintable: After surface layer formation
Instructions for use: Before application, the surfaces must be cleaned and degreased. The sealant can be applied directly from the cartridges using standard pneumatic or manual dispensing guns. After application, the sealant can be smoothed with a spatula. It is recommended to wait for the surface film to form before painting. 0.02em;">The material should be at room temperature for processing.After application, the material can be smoothed with water or gasoline.
Any type of dispensing gun with a piston can be used for application, e.g. TEROSON STAKU hand gun, preferably TEROSON POWERLINE II or telescopic air guns TEROSON VR 10.
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Teroson Terostat 9100 safety data sheet on request.
For further technical details and information on safety when working with the product, I recommend consulting the product data sheet and safety data sheets available directly from the manufacturer.
Additional parameters
| Category: | Adhesives and sealants > Sealants and silicones > Polyurethanes > Single component |
|---|---|
| Weight: | 0.425 kg |
| EAN: | 4058093026366 |
| Color: | grey |
| Country of origin: | Germany |
| Manufacturer's brand: | Teroson |
| Maximum temperature °C: | +90 |
| Minimum temperature °C: | -40 |
| Product: | polyurethane adhesive |
| Číslo výrobce: | 1896975 |
| Značení: | TEROSON PU 9100 GY, 310ml |
| Typ: | Polyuretan |
Be the first who will post an article to this item!