Teroson MS 939 - 290 ml gray sealant

Product detailed description

Teroson Terostat MS 939 grey is a one-component sealant for sealing components and structural bonding. It is based on MS-polymer, low modulus and cures with atmospheric moisture to a flexible product. The curing speed depends on the thickness of the applied bead and the ambient air humidity. These times can be reduced by increasing the temperature and air humidity. Too low a temperature as well as low humidity will slow down the curing process. Teroson Terostat MS 939 grey is free of solvents, isocyanates, silicones and PVC and is also odorless. Teroson MS 939 is compatible with suitable coating systems. The adhesive is UV-resistant and can therefore be used for indoor and outdoor applications. /> ·Flexible structural connection of metals and plastic parts·For car bodies, caravans, railway wagons.
·In air conditioning units and industrial ventilation.
_x00 ·Color: gray·Odor: Odorless
·Consistency: Thixotropic paste
·Operating temperature: -40 to +100°C ( 120& /> ·Density: 1.5 g/cm3
·Tensile strength: 3 MPa
·Destructive elongation: 250%
· /> ·Basically compatible with paints.
Instructions for use:
Apply the sealant from the cartridge to a clean, properly prepared surface. Non-stick surface in approx. 20 minutes. Polymerizes with atmospheric moisture. Suitable application temperature: +5 to +40 C
Adhesion:
Terostat MS 939 white has excellent adhesion to most common materials: sheet steel (degreased raw, phosphated, hot-dip or electrogalvanized, chrome-plated); stainless steel, brass, aluminum (raw, ground, anodized); glass; polyamide, PVC, PUR-RIM, polyester, EPDM, most thermoplastic mixtures. When bonding plastics or painted surfaces, especially with powder coatings, we recommend checking the adhesion by testing. Mold release agents are often used when molding plastics. These release agents must be removed before bonding. Depending on the type of substrate, a surface activator may be required to achieve optimal adhesion. (We will provide the necessary information on request).
Instructions for assembly, disassembly or cleaning can be found in the product data sheet. Teroson Terostat MS safety data sheet 939 grey is only available on request.

• Clean the bonded parts thoroughly with ERGO 9190 cleaner, 500 ml pack TEROSON MS 939 is a black/white/grey, flexible, silane-modified polymer sealant, odourless, which is used. The product cures to an elastomer. The cured product has good UV resistance. It is resistant to sag and has a high initial tack (depending on the size of the joint and the weight of the bonded parts). Non-corrosive and free of solvents, isocyanates, silicones and PVC. The curing speed can be accelerated by using LOCTITE MS 9371B.