Teroson MS 937 - 290 ml gray sealant

Product detailed description

TEROSON MS 937 grey (formerly known as Terostat 937)- IDH: 245532

TEROSON MS 937 is a one-component sealant based on silane modified polymers (SMP) that cures. sealing in various industries such as automotive, construction and industrial assembly. It offers excellent adhesion to a wide range of materials, including metals, plastics and painted surfaces, without the need for a primer.

Advantages:

• One-component, moisture-curing
• Excellent adhesion to various materials without the need for a primer
• Elastic and flexible, ideal for dynamically loaded joints
• UV and isocyanate-resistant, environmentally friendly
• Mold-resistant (according to DIN EN ISO 846, VDI 6022)

Technical parameters:

• Technology: Silane-modified polymer (SMP)
• Density: Approx. 1.5 g/cm?
• Skin formation time: 5 to 15 minutes at 23°C and 50% relative humidity
• Curing speed: Approx. 4 mm/24 hours
• Hardness (Shore A): 6 tensile: 3.0 MPa (ISO 37)
• Elongation at break: 220 % (ISO 37)
• Strength at 100% elongation: 2.0 MPa (ISO 37)
• Volume change: <2 % (DIN 524 -40°C to +100°C (short-term up to 120°C)

Applications:

• Automotive industry: Bonding and sealing of metal and plastic parts, e.g. side panels and vehicle roofs.
• composite panels and metal structures.
• Industrial assembly: Used in machine and equipment assembly, HVAC systems and in environments where components are exposed mechanical stress and weathering.

Use when applying: surface: For thorough degreasing and removal of dirt from metal surfaces, a cleaning agent is the ideal choice. For painted or metal surfaces, use Teroson SB 450. This product is specially designed for gentle and effective cleaning of plastics.

product: For precise and controlled application of sealants and adhesives, you can use several options. For larger volumes, consider using the Teroson Power Line II application gun, which allows for quick and effective application of materials even to large areas.

Product table for easy selection of the appropriate MS adhesive

Typical properties:

• Before curing: Thixotropic paste, easy to apply to vertical surfaces without dripping.
• After curing: Flexible and elastic material that provides high resistance to dynamic loads and external.

  Resistance to chemicals: TEROSON MS 937 is resistant to water, diluted acids, diluted alkalis and salt solutions, but is not resistant to long-term exposure to concentrated solvents or aggressive chemicals.

  Pretreatment degreased. Surface cleaning is recommended isopropyl alcohol or similar solvent. In some cases it may be necessary to roughen the surface or apply a primer to ensure optimal adhesion. 2 to 5 bar.

• If the product has been stored at low temperatures, warm it to room temperature before application.
• Apply the sealant evenly and allow to cure.

Cleaning: TEROSON VR 10. After curing, the material can only be removed mechanically.

Storage:

• Recommended storage temperature: 10 °C to 25 °C
• Shelf life: 12 months in unopened original packaging
937 on request.