Teroson MS 650 - 290 ml black

Product detailed description

TEROSON MS 650 is a one-component adhesive and sealant based on silane-modified polymer (SMP). This high-performance product is intended for flexible bonding and sealing where high strength and flexibility are required. It cures by reaction with atmospheric moisture and forms a soft elastic joint that is resistant to weathering, UV radiation and chemicals. TEROSON MS 650 is characterized by excellent adhesion to various substrates such as metals, plastics and glass, without the need for a primer.

Technical parameters:

• Technology: Silane-modified polymer (SMP)
• Appearance: Thixotropic paste
• Hardness (Shore A): surface skins: 5 minutes at 23°C and 50% relative humidity
• Curing speed: 3 mm/24 hours at 23°C and 50% relative humidity
• Tensile strength: 3.0 MPa (ISO 37)
• Temperature range in service: -40°C to +90°C (short-term up to 120°C)
• UV resistance: No visible changes after 6 weeks

Applications:

• Automotive plastics industry, e.g. side panels and roof panels in the production of vehicles and caravans.
• Construction: Ideal for sealing seams and joints on metal structures, photovoltaic panels, air conditioning and ventilation.
• General industry: Used in the production of railway carriages, tanks and metal. with high resistance to water and weathering.

Use for application:

• Surface preparation: For thorough degreasing and removal of dirt from metal surfaces, the ideal choice is Teroson VR 10 cleaner, which reliably removes oils, greases and other dirt. For plastic, painted or metal surfaces, use Teroson SB 450. This product is specially designed for gentle and effective cleaning of plastics without the risk of damaging the surface. Loctite SF 7200. This agent effectively breaks down the bond and facilitates the removal of material, which is ideal for preparing the surface for re-application of adhesive or sealant.

• Opening cartridges: For easy and quick opening of aluminum cartridges, use Teroson ET CR OPENER - AL cartridge opener. This practical tool ensures a clean and precise opening, which allows easy dosing of the material.

• Product application:For precise and controlled application of sealants and adhesives, you can use multiple options. For manual application, we recommend the Teroson Staku application gun, which ensures even dosing of the material. If you are working with larger volumes, consider using the Teroson Power Line II application gun, which allows for quick and efficient application of materials even on large areas.

round nozzle. If necessary, additional nozzles can be purchased, such as the Teroson round nozzle for MS polymers, which ensure smooth work and correct dosing.

When working with sealants and adhesives, we recommend using the Teroson VR 320 cleaning agent. This biodegradable cleaner is gentle on the skin but effective against oils, greases and other contaminants, ensuring thorough and safe hand cleaning. For application to bare steel or aluminum surfaces, we recommend using abrasive roughening. If repainting is required, apply the coating within three days of applying the product. In case of repainting after more than three days, we recommend using Teroson 150 primer.

Product table adhesives

Typical properties:

• Before curing: Thixotropic paste that does not drip, also suitable for applications on vertical surfaces.
• After curing: Shore A hardness 60 provides an optimal balance between flexibility and strength. The tensile strength of 3 MPa is ideal for strong and flexible bonding. The elongation at break reaches 180%, which ensures the flexibility needed for dynamic stress. chemical substances.

  Surface preparation: The surfaces must be clean, dry and free of oil and grease. If necessary, it may be necessary to roughen the surface or use a primer to improve adhesion. For plastics that often contain release agents, it is important to remove these agents thoroughly before application. Preliminary application tests are recommended, especially for powder coatings and other specific materials. extrusion, allow the product to reach room temperature before application if it has been stored at low temperatures.

• Apply the sealant to the surface and spread evenly as needed.
• After hardening, the product can be painted over.
We recommend the cleaners TEROSON VR 10, VR 30 or VR 40 for application equipment. After hardening, the product can only be removed mechanically.
• The product is not sensitive to frost

Technical data sheet or safety data sheet TEROSON MS 650 on request.