Teroson Bond 60 (PU 8597 HMLC) - set for direct glazing
Code: 981536
Related products
Product detailed description
Teroson PU 8597 HMLC (formerly known as Teroson Terostat 8597 HMLC - IDH: 1507386) is a one-component, flexible, structural PU adhesive that cures under the influence of atmospheric moisture. It is used for direct glazing in the automotive industry and for joints where the stress should be distributed by the adhesive (flexible bonding).
310 ml, 570 ml, One-component, high-modulus, polyurethane adhesive with low conductivity and excellent joint filling ability. The ideal product for high-quality joint filling when replacing car windows. Use together with Terostat 8517 H glass primer. The resulting surface is smooth and shiny, excellent adhesion to the cut surface of old tan glue beads. Good UV resistance. Long-term stable high strength.
- High modulus
- Low conductivity
- Elastic
- Stress compensation
Surface preparation with: Teroson SB 450 and Teroson VR 100 parameters
- Operating temperature (short-term exposure) -40 to +90 (+120) °C
- Shear strength: > 5 N/mm2 at 5 mm layer
- Initial strength: 1 h/4 h
- Viscosity: Pasty
High modulus, low conductivity, 4 hour break-through time according to European standard (crash test with frontal impact at speed)
Instructions for installation, removal and cleaning can be found in the product data sheet. Safety data sheet Teroson Terostat 8597 HMLC on request.
Henkel - Teroson Terostat 8597 HMLC - IDH: 1507386
Area of application: Bonding of windscreens, rear and side windows to the bodies of motor vehicles (passenger cars, buses, trucks, cabins). Single or double pane windows of buses and railway carriages.
Terostat 8597 HMLC kit contains:
- Polyurethane sealant for direct glazing Terostat 8597 HMLC, Terostat Primer 8517H, wool squeegee, twist, twist cleaner, cloth, wedges, FL cleaner and instructions for use. (Point pliers are not included in the kit)
Time to go for a repaired vehicle without airbag: in 1 hour.
Time to go for a repaired vehicle with airbag: in 2 hours.
When replacing a windscreen where it is important to follow the original OEM method (with primer) and where a strong safety guarantee is required.
Benefits for you
- For all types of vehicles
Good non-sag - No thread pulling
- Cold application with any type of application equipment (best results achieved using PowerLine
| Technical data
| Terostat 8597 HMLC TEROSON® PU 8597 HMLC SET is a black, smooth, sag-resistant direct glazing polyurethane adhesive. Other parts of the kit are primer, applicator (new), sliding nozzle, wire cutting, cleaning tissue, abrasive pad, spacers and instructions. The kit is used to collect front, rear and side screens on engine bodies, utilities, specialties and rails. |
Additional parameters
| Category: | Adhesives and sealants > Bonding in the auto repair industry > Auto glass repair > Repair kits |
|---|---|
| Weight: | 0.561 kg |
| EAN: | 4058093033128 |
| Manufacturer's brand: | Teroson |
| Product: | polyurethane adhesive |
| Číslo výrobce: | 2688925 |
| Značení: | TEROSON BOND 60, Set |
| Typ: | Polyuretan |
Be the first who will post an article to this item!