Tangit cleaner PVC-U, ABS - 1 L

Product detailed description

Tangit PVC-U cleaner, ABS - 1 L Tangit PVC-U cleaner, ABS Pipe adhesive Product characteristics Long open time: 4 minutes Easy to create a joint even in the case of larger diameters (one person is enough for pipes up to 80 mm) Easy and clean processing Higher safety thanks to excellent gap-bridging ability Maximum protection of the pipe (except: concentrated acids) Meets the requirements of EN 14814 and EN 14680 Meets the requirements of EN 1329 for the discharge of water through plastic pipe waste systems Certified by VUIS – Waterworks and Sewage, sro Suitable for food applications (SGS, Institut Fresenius, 8 o 02 Area of application Bonding of thermoplastic pressure pipe systems made of hardened PVC (drinking water, gas) in accordance with EN 1452 Suitable for non-pressure pipe systems (wastewater drainage) in accordance with EN 1329 For assembly work and repairs (e.g. sewage pipes) Ideal for structural joints of PVC sheets and plates. catch basins, cabinets) Plastic piping systems for industrial applications in accordance with EN ISO 15493 Application Cut the pipe end at a right angle, chamfer the edge from the outside (15°) and clean. Clean and dry the surfaces to be joined briefly. Mark the installation depth on the pipe end. Apply Tangit PVC-U/PVC-C, ABS Cleaner using absorbent paper towels and thoroughly clean the dry surfaces to be bonded. Use a new paper towel for each cleaning. Stir Tangit adhesive before use, then apply along both sides with a brush (thin layer inside the fitting, thick at the end of the pipe), join the pipe and fitting without twisting and jamming during the open time and hold firmly for a few seconds. Do not subject the bonded joint to mechanical stress for 5 minutes. After the last bonding, wait at least 10–12 hours before placing the pipe in the trench. Waiting time before starting operation and performing a pressure test: 24 hours for new installations, 1 hour for each bar of pressure for repairs – longer in individual cases. Consumption For approximately 30 joints at d = 63 mm (calculated on 500 g) Warning Avoid contact with open flames and sparks when working. Ensure good ventilation in the work area. Wear suitable protective clothing when working. Follow the instructions in the Technical and Safety Data Sheets. Packaging 125 g tube 250 g can 500 g can 1,000 g can Tangit PVC-U cleaner, ABS - 1 l.