Sicomet 99 - 20 g instant glue

Product detailed description

Sicomet 99 - IDH 218636

Sicomet 99 is a clear to slightly cloudy, high-viscosity, universal methyl cyanoacrylate instant adhesive designed for high-strength metal bonding. Thanks to its unique composition, it is also suitable for metal-to-rubber and metal-to-plastic bonding, and its high viscosity allows it to be used even for bonding with joints up to 0.2 mm in size. Sicomet 99 provides strong joints that are resistant to temperatures up to +100 ° C.

Advantages:

• High-strength joints for metals
• Suitable for bonding metal-rubber and metal-plastic
< 0.2 mm
• Fast curing
• Resistance at temperatures up to +100 ° C
• Possibility of increasing the curing speed using the Sicomet HI-Speed BS activator accelerator
• The strength of the joint can be increased by using the Sicomet Power Primer primer
• Technology: Cyanoacrylate
• Chemical type: Methyl cyanoacrylate
• Colour: Clear to slightly cloudy
• Viscosity: 1750 - 2250 mPa·s (Cone &2)
• Density: 1.07 - 1.12 g/cm? (ISO 12185)
• Temperature resistance: -20 to +100 °C
• Shear strength: 15 - 21 N/mm?
• Curing speed: 9 - 90

  Typical properties:

  • Before curing:
    • Viscosity: 1750 - 2250 mPa·s
  • After curing:
    • Shear strength (ISO 45 N/mm?
    • Aluminium: 14 - 19 N/mm?
    • Polycarbonate: 7 - 12 N/mm?
  • Tensile strength (ISO 6922):
    • Nitrile: ? 5 N/mm
    N/mm? after 24 hours

Application: Sicomet 99 is ideal for bonding metals and materials that contain metal components, such as rubber or plastics. The product is widely used in industry where high bond strength is required, especially in applications with metal surfaces.

Use for application:

• Surface preparation: Loctite SF 7063 . If you prefer more environmentally friendly products, Loctite SF 7061 is the ideal choice, which ensures gentle but effective cleaning. hydrocarbons.

• Removal of sealant and adhesive residues: if you need to remove old sealant, adhesives or other materials from the bonded surface, Loctite SF 7200 is the ideal choice . Its application is simple - just apply and let it act, which makes the material easily peel off. Be careful with painted and plastic parts. Sicomet Debonder or Sicomet Hi Speed BS activator The activator accelerates curing on passive

  Precision applications: for precise application, application needles can be used. There are a variety of needle types, so we recommend this trial set of 24 dispensing needles, so you can best find out which type it is. There are three basic lines PPC, PPF, SSS and the color of the application needle indicates the inner diameter of the needle. Loctite SF 7840 . This universal water-based cleaner is biodegradable and is ideal for effective cleaning of various surfaces without damaging the material.

• Cleaning hands after work: After completing the application, use Loctite SF 7850, which is suitable for effective hand cleaning. This biodegradable cleaner removes oils, greases and other dirt.

  Instructions for use:

  1. Clean surfaces from grease and dirt with Loctite cleaner and allow to dry.
  2. To improve adhesion on low-energy plastic surfaces, use Sicomet Power Primer.
  accelerate curing if necessary.
  3. Apply adhesive to one of the bonded surfaces and join the parts within a few seconds.
  4. Fix the parts until handling strength is achieved. Full bond strength is achieved after 24 to 72 hours. °C to 8 °C. Do not expose the product to temperatures outside this range, as this will affect its properties. Do not return unused material to the original packaging.

     Technical data sheet or safety data sheet Sicomet 99 on request.