Sicomet 77 - 20 g instant glue

Product detailed description

Sicomet 77 - IDH 1437114 -is a highly viscous ethyl cyanoacrylate instant adhesive designed for universal use, especially for bonding plastics, elastomers and metals. Due to its high viscosity, the product is suitable for bonding larger joints and uneven surfaces. Curing is fast and triggered by atmospheric moisture, which ensures strong and durable joints. Sicomet 77 can be used at operating temperatures up to +80 °C with short-term resistance up to +100 °C. moisture curing

Typical properties:

Application: Sicomet 77 is ideal for bonding plastics, rubber, elastomers and joints or uneven surfaces. Due to its versatility, it is used in industrial applications where fast curing and a strong bond are required. Typical applications include the assembly of plastic and rubber profiles, seals and other industrial components.

Use for application:

• Surface preparation: Use Loctite SF cleaner to thoroughly degrease and remove dirt 7063 . If you prefer more environmentally friendly products, the ideal choice is Loctite SF 7061 , which ensures gentle but effective cleaning. hydrocarbons.

• Removing seals and adhesive residues:If you need to remove old seals, adhesives or other materials from a bonded surface, the ideal choice is Loctite SF 7200 . Its application is simple - just apply and leave to act, which will easily peel off the material. Be careful with painted and plastic parts. Sicomet Debonder or Sicomet Hi Speed BS activator The activator accelerates curing on passive

  Precision applications: for precise application, application needles can be used. There are a number of needle types, so we recommend this test set of 24 dispensing needles, so you can best find out which type it is. There are three basic PPC lines, PPF, SSS and the color of the applicator needle indicate the inner diameter of the needle. Loctite SF 7840 . This water-based universal cleaner is biodegradable and is ideal for effective cleaning of various surfaces without damaging the material.

• Cleaning hands after work: After finishing the application, use Loctite SF 7850 , which is suitable for effective hand cleaning. This biodegradable cleaner removes oils, greases and other contaminants.

  Instructions for use:

  1. Clean surfaces from grease and dirt with Loctite cleaner.
  2. For better adhesion on plastics with low surface energy, apply Sicomet Power Primer.
  3. Use Sicomet . necessary.
  4. Apply glue to one of the bonded surfaces. Do not use a brush or cloth.
  5. Join the parts in seconds and position them precisely.
  6. Keep the parts firmly clamped until they have hardened.
  7. Full strength is achieved after 24 to 72 hours.
  &>

  Packaging:

  • 20 g bottle
  • 500 g bottle

  Storage: Store in unopened original packaging at temperatures between 2°C and 8°C. Do not expose the product to temperatures outside this range, as this may affect its properties. Do not put unused material back into the original packaging.

  Technical data sheet or safety data sheet Sicomet 77 on request.