Self-tapping screw for steel DIN 938 M8x35-8.8

Product detailed description

The DIN 938 steel self-tapping screw with dimensions M8x35 and strength class 8.8 is designed for fixed connections in steel, especially in blind holes. This component is characterized by threads at both ends, with the longer thread intended for screwing into the base material, while the shorter thread with a chamfer is prepared for fastening the nut.

The thread diameter is M8 with a metric thread type and a pitch of 1.25 mm. The total length of the screw is 35 mm, while the length of the screw-in thread is 28 mm. The width c is 3.2 mm, the width e is 8 mm and the width a is 1.6 mm. The screw is made of steel without surface treatment, which means that it is suitable for applications where additional corrosion protection is not required.

The strength class 8.8 indicates that the bolt has a minimum yield strength of 640 MPa and a minimum tensile strength of 800 MPa, which makes it suitable for use in applications where higher mechanical properties are required. This type of bolt is often used in engineering and construction, where it is necessary to ensure a reliable and strong connection of components.