Pattex FIX Extreme TOTAL - 440 g

Product detailed description

Pattex FIX Extreme TOTAL is a special flexible adhesive for absorbent and non-absorbent materials for bonding, filling and sealing all types of materials. Pattex FIX Extreme TOTAL will not let you down in any situation. Features: Extreme initial adhesion up to 350 kg/m 2 Instantly holds On almost all materials For interior and exterior Resistant to UV radiation Weatherproof Areas of application: Bricks Ceramics Concrete Plasterboard Plywood Stone MDF Wood Metal Hardened PVC Tricks: Toothpick trick To prevent the glue from spreading too much over the surface when pressing the object to be glued, try inserting a toothpick into the glue strip in several places. When the object is subsequently pressed, the toothpicks will maintain the correct distance from the surface and prevent the glue from being squeezed out of the side of the joint. What is a porous material? Porous materials are materials that allow gases and liquids to pass through, either completely or partially (e.g. wood, cork, etc.). Non-porous materials do not allow any substances to pass through (e.g. glass, metals, plastics, etc.). How much glue will I need? For a perfect and strong bond, we recommend applying 200 to 400 g of glue per square meter. Packaging: 440g cartridge Storage: Store in the original closed packaging in a dry place. Protect from temperatures below +10 °C and above +25 °C. Instructions for use: 1. The glued surface must be clean, dry, free of dust and grease. 2. Cut the top of the cartridge above the thread. Screw on the plastic tip (it is not necessary to cut it) and insert the cartridge into the gun. 3. Depending on the size and shape of the glued element, apply glue in strips or dots. Just apply to one glued surface. 4. After gluing the element, its position can be adjusted for 10 minutes. After ventilation and setting the correct position, press the object firmly against the substrate. 5. Secure heavier objects and objects exposed to mechanical stress with additional fixation for at least 24 hours. 6. Remove fresh adhesive residues immediately using water with a large amount of detergent, alcohol or another suitable solvent cleaner. 7. The joint reaches its final strength after 24 hours at a temperature of +5 °C to +25 °C. Pattex FIX Extreme TOTAL - 440 g.