Pattex Chemoprene Extreme Profi - 1 L

Product detailed description

Pattex Chemoprén Extreme Profi - 1 L Pattex Chemoprén Extreme Profi is suitable for contact bonding with very high strength, e.g. for bonding leather, wood, rubber, textiles, metals, plywood, cardboard and various hard plastic materials. For bonding insulating materials in areas exposed to higher temperatures (e.g. near heating, hobs, etc.). Porous or overly absorbent materials (chipboard, wood) should be coated at least once with Chemoprén Extreme PROFI glue diluted with Chemoprén Thinner PROFI in a ratio of 2:1 before bonding. It is not recommended for bonding polystyrene, Teflon, plasticized PVC, PE and PP. It is not recommended for use on joints that come into direct contact with food and drinking water. Main advantages: Areas of application: Extreme PROFI Leather Wood Rubber Textile Metal Plywood Cardboard Tips and tricks: How to remove glue contamination? If you have soiled the area around the glued surface or other objects with glue, do not despair. With Pattex Chemoprén Thinners KLASIK you can easily remove all fresh contamination. Packaging: Extreme PROFI 250 ml can 1 l can 4.5 l can Storage: Store in the original closed packaging in a dry place. Protect from temperatures below +5 °C and above +25 °C. Instructions for use: 1. The glued material must be clean, dry and free of dust and grease. When gluing smooth materials such as metal or plastic, additional roughening of the surfaces will increase the strength of the joint. 2. Mix the glue thoroughly before use. 3. Apply a thin layer with a notched trowel, brush or roller to both surfaces. Let the adhesive layer dry for about 15 minutes, then place both glued parts together and press firmly. 4. The strength of the joint is determined by the force of compression, not the duration of the pressure. The final strength is achieved after 24 hours. CHEMOPREN Pattex Chemoprén Extreme Profi - 1 L.