Lukoprene catalyst 8A - 200 g

Product detailed description

Crosslinking agent for two-component rubbers

After adding the recommended amount ofLukopren Catalyst to the rubber paste, it will be vulcanized into silicone rubber. It is intended only for two-component condensation silicone rubbers Lukopren N 8100 and N 8200. Catalyst for high-strength two-component rubbers Lukopren N.

Dosage of Lukopren Catalyst 8A

• for Lukopren N 8100 it is 4% 8200 it is 3 or 4% by weight (depending on the required workability time). of the substrate. They are used for the production of flexible molds and for potting in electrical engineering. Vulcanizates have low shrinkage and good heat resistance. To color them to the desired shade, you can use Lukoprene Pigment Pastes.
  
  _ Catalyst 8A must be kept tightly closed to avoid contact with air humidity, which reduces its effectiveness.
  • A lower dose of Lukoprene Catalyst 8A will lead to slower vulcanization and longer workability time, on the contrary, a higher addition will cause faster vulcanization, shortening the workability time of the catalyst (Lukoprene Catalyst N)
  • Appearance clear, slightly yellowish liquid
  • Flammability flammable