Lubline CUT 15 - 10 L cutting oil cutting oil ( Mogul CUT 15 )

Product detailed description

Lubline CUT 15 - Detailed product description Lubline CUT 15 is a highly effective water-immiscible cutting oil, developed on the basis of chlorine-free mineral oil. It is intended for general machining operations on alloyed and unalloyed steel and cast iron, with limited suitability for machining aluminum and copper. This product is ideal for demanding operations and machining of difficult-to-machine materials, where the tool operates in the area of minimal chipping. effect

Technical parameters:

• Technology: Chlorine-free mineral oil
• Chemical type: HC liquid-based
• Density at 15°C: 858 kg/m? (ČSN EN ISO 12185)
• Viscosity at 40°C: 12 mm?/s (ČSN EN ISO 3104)
• Flash point: 155°C (ČSN EN ISO 2 100 °C, 3 hours): 3b (ČSN 65 6074)

Application: Lubline CUT 15 is suitable for a wide range of machining operations, including broaching, hobbing, turning, shaving, reaming. It is ideal for use in machining alloyed and unalloyed steel, cast iron and with limited suitability for aluminum and copper alloys. stored in closed containers, in ventilated areas at temperatures up to 40 °C. The warehouse must be equipped with a first aid kit and a source of drinking water. Due to the risk of slipping, it is necessary to prevent spillage of the product.

Safety: It is important to avoid contact with skin and eyes and to use suitable protective clothing, protective gloves and protective goggles or a face shield. Keep a safe distance from ignition sources. At higher temperatures or mechanical spraying, vapors/aerosols may be formed that cause irritation of the eyes and respiratory tract. It is necessary to ensure the measurement of the concentration of pollutants (oil aerosols) in the air of the workplace.

Technical data sheet or safety data sheet Lubline CUT 15 on request.