Loctite UK 8103 B5 - 24 kg Macroplast polyurethane adhesive

Benefits:

• Two-component polyurethane formulation without soluble polyurethane formulation. joints.
• Volume stability during curing, without measurable changes.
• Suitable for bonding metals, plastics, wood and rigid foams.

Technical parameters:

• Technology: Polyurethane
• Curing: Polyaddition
• Color: Component A (Loctite UK 8105 B5) - beige, component B (Loctite UK 5400) - brown
• Mixing ratio (weight): 5:1
• Mixing ratio (by weight):
• Consistency:
  • Component A: viscous liquid (viscosity 24,000 to 30,000 mPa.s, Brookfield, 20 °C)
  • Component B: thin liquid (viscosity 250 to 350 mPa.s2)
  • Mixed product: liquid (viscosity 8,000 to 10,000 mPa.s, 25 °C)
• Potency: 4 to 7 minutes at 20 °C (120 g mixture)
• Shear strength | 1465
• Temperature resistance: -40 °C to +80 °C
• Consumption: 200 to 400 g/m? depending on the substrate

Application:

• Loctite UK in the container and construction industries, as well as in the manufacture of filters (e.g. oil filters). It can also be used as a potting, filling and coating compound.

Use in Application:

1. Surface preparation: For thorough degreasing and removal of dirt, use Loctite SF 7063 cleaner. If you are working with plastic materials, Loctite SF 7070 is the ideal choice, which ensures gentle but effective cleaning without damaging the surface.

   Material: For thorough removal of old deposits and dirt, including oils, greases and other industrial dirt, use Loctite SF 7840

2. Hand cleaning after work: After application, use Loctite SF 7850 , which is suitable for effective hand cleaning. This biodegradable cleaner removes oils, greases and other dirt. Loctite polyurethanes for easy selection.

   

   Typical properties:

   • Before curing: Liquid mixture with higher viscosity of component A and lower viscosity of component B, homogeneous after mixing.

     Use for application:

     • Mixing of the components can be done manually or using a two-component dosing system. After mixing, no streaks should be visible and the adhesive should be applied within the pot life (4 to 7 minutes). It is recommended that the parts are under sufficient pressure during curing, which will ensure a strong bond.

     Instructions for application:

     1. Prepare the surface by removing dust, grease and other contaminants.
     2. For metal surfaces, use a suitable primer to improve adhesion.
     3. Part A must be slowly homogenized before use.
     4. Mix parts A and B in a ratio of 5:1 (by weight) and mix slowly to avoid air entrainment.
     5. Apply the mixture to the surface during the pot life.
     6. After application, ensure that

     Packaging: Loctite UK 8103 B5 is available in 24 kg packages.

     Storage:

     • Part A: Recommended storage temperature 12 to 25 °C, shelf life 12 months. in unopened original packaging.

     Technical data sheet or safety data sheet Loctite UK 8103 B5 on request.