Loctite SI 5910 - 300 ml surface seal black

Product detailed description

gasket that is used as a replacement for cork and paper die-cut gaskets, where it provides excellent sealing up to a maximum gap of 1 mm. It is intended for sealing plastics and metals or a combination of metal-plastic bonding and can also be used for painted parts.
Silicone non-corrosive surface sealant Loctite 5910 is recommended wherever there is strong vibration or springing of the sealed parts and where ·filling large joints,·high temperature resistance up to 250 °C,·low odor and non-corrosive surface sealant,
·gluing flexible joints in permanent contact with oil,<0 withstand large movements of the bonded joint, thixotropic character (non-flowing adhesive on vertical surfaces), sealing covers pressed from steel sheets (oil pans, distributor covers).
has excellent resistance to oils and good resistance to water and glycol, but is not recommended for use in contact with gasoline.
Highly flexible and durable silicones, Flat gaskets and industrial adhesives with fast delivery. Choose sensible solutions from Loctite in the e-shop - Henkel's premium partner. Technical parameters: Supplied in packages: 40 ml, 80 ml, 200 ml, 300 ml /> ·Non-stick surface in: 40 [min]
·Full volume cure in 24 h: 2.75 [mm]
·Temperature resistance: - 60 to + 2 extrusion: 300 [g/min]·Shear strength: 1.2 [N/mm2]·Elongation at break: 400 [%]·Tensile strength: 1.7 [N/mm2]
· /> Properties:
·Chemical type: oxime silicone·Appearance: black paste·Ingredients: one-component·Viscosity: thixotropic·Curing: room vulcanization sealing·Special advantage: non-corrosiveInstructions for assembly, disassembly and cleaning can be found in the product data sheet. The Loctite 5910 safety data sheet is available on request.
Not sure about the product selection? We will be happy to advise you, contact us!

• Clean the bonded parts thoroughly with ERGO 9190 cleaner, 500 ml pack or
  LOCTITE SI 5910 is a silicone sealant designed for sealing flexible flange joints and machined or alloy surfaces. It fits into gaps up to 1 mm and is able to cure to a depth of approximately 2.75 mm in 24 hours. Typical applications include covers pressed from sheet steel (such as oil pans).