Loctite SI 5699 - 80 ml surface seal gray

Product detailed description

Loctite 5699 is a premium non-corrosive gasketing compound with excellent resistance to oil, water and glycol. It is a grey silicone (Ultra Grey) that is ideal as a gasket for both rigid and flexible flange joints.
Loctite 5699 Ultra Grey Non-Corrosive Silicone is a grey paste that has a thixotropic viscosity that limits product runoff on vertical surfaces, temperature resistance up to 200°C. gasket. Loctite 5699 is successfully used in the automotive industry, repair or engineering and is particularly suitable for:
·machined or cast surfaces,
·sealing gearboxes and alloy engine covers,
·bonding flanges in permanent contact with water or glycol,
· chrome-plated zinc, · durable silicone for plastic surfaces, metal-plastic combinations and painted parts, · non-corrosive silicone surface sealing of water pumps, valve covers, intake manifolds, differentials, etc.
Loctite 5699 silicone is not recommended for use in contact with gasoline!
Flexible silicones with fast delivery! Choose in the e-shop - Henkel's premium partner.
Technical parameters:
·Supplied in packaging: 40 ml, 80 ml, 300 ml
·Maximum joint: 1 [mm]
·Non-stick surface in: 30 [min]
·Full volume cure in 24 h: 2.5 [mm]<0 / [°C]·Extrusion speed: 200 [g/min]·Shear strength: 1.7 [N/mm2]·Elongation at break: 100 [%]·Tensile strength: 2.4 [N/mm2]
·Shore hardness: 45 to 75>A silicone
·Appearance: gray paste
·Ingredients: one-component·Viscosity: thixotropic·Curing: vulcanization at room temperature·Application: sealing·Special advantage: non-corrosive Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Safety data sheet Loctite 5699 on request.
Not sure about the product selection? We will be happy to advise you, contact us!

• Clean the bonded parts thoroughly with ERGO 9190 cleaner, 500 ml package or
  LOCTITE SI 5699 is a flexible silicone sealant that hardens with atmospheric moisture into a tough gel. This product is primarily intended for sealing flange joints. It has good resistance to oil. It can also be used on rigid flange joints, e.g. on gearboxes. It has a non-stick surface after about ten minutes. This product is resistant to water and glycol and can be used on machined or alloyed surfaces, on metals or plastics.