Loctite SF 770 - 300 g primer for instant adhesives

Product detailed description

specifically for preparing polyolefins, plastics and other low-energy surfaces to be bonded with Loctite cyanoacrylates. This activator is designed for difficult-to-bond plastics, is applied to the surface before applying the adhesive and helps create adhesion of the instant adhesive to the surface. with all Loctite instant adhesives. Primer for polyolefins is not recommended for use in assemblies where high peel strength is required, but in other areas of industrial bonding its use offers a number of great solutions:
·very economical surface primer,
adhesion of the adhesive to the surface,
·acceleration of fixation for most materials less than 5 seconds,
·bonding without costly surface preparation such as plasma treatment,·activator for polyethylene, polyprop rubber materials, Teflon, etc.
Fast delivery and cheap shipping! Buy activators and primers for industrial plastic bonding at a bargain price from the largest distributor of Loctite products in the Slovak Republic - !
Technical data and properties:
·Technology: primer for cyanoacrylates·Solvent: nH 0.07 to 0.13%·Appearance: translucent to slightly hazy colorless liquid
·Fluorescence: positive under UV radiation·Viscosity: very low·Applications: surface /> Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Loctite 770 safety data sheet on request.
Not sure about the product selection? We are happy to advise you, contact us!

• Clean the bonded parts thoroughly with ERGO 9190 cleaner, 500 ml pack or
  LOCTITE SF 770 is designed to prepare polyolefins and other low-energy surfaces for bonding with cyanoacrylate adhesives. On surfaces treated in this way, the final strengths of LOCTITE cyanoacrylate adhesives are generally similar to those stated in the technical data sheets. It is recommended only for difficult-to-bond surfaces - these include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials (TPE). LOCTITE SF 770 is not recommended for joints that require high peel resistance.