Loctite SF 7649 - 150 ml activator N for acrylic adhesives

Product detailed description

Loctite 7649 is an excellent solvent-based N activator for Loctite anaerobic adhesives and sealants. It is designed for applications on passive metals and inactive surfaces or to accelerate the cure of areas with a large gap. Primer N Loctite 7649 is especially recommended for environments where the low ambient temperature does not exceed 15 °C. Loctite 7649 activator is a translucent green liquid with a very low viscosity that accelerates the cure and shortens the fixation time in time, the length of which is affected by the adhesive used. and cheap shipping! Buy activators and primers for industrial bonding and sealing of metals at a bargain price from the largest distributor of Loctite products in the Czech Republic - !
Technical data and properties:
·Technology: activator for anaerobic adhesives and sealants
·Chemical type: copper salt and aliphatic amine< ·Appearance: translucent green liquid·Viscosity: very low·Application: acceleration of curing of anaerobic Loctite products
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Loctite 7649 safety data sheet on request.
Not sure about the product selection? We are happy to advise you, contact us!

• Clean the bonded parts thoroughly with ERGO 9190 cleaner, 500 ml pack or
  LOCTITE SF 7649 is designed to accelerate the curing of LOCTITE anaerobic adhesives without significant loss of final strength. It is especially recommended for use on passive metals or inert surfaces with large joints. LOCTITE SF 7649 significantly improves curing at low temperatures. It is recommended to use at temperatures below 15 °C.