Loctite SF 7387 - 50 ml activator for acrylic adhesives

Product detailed description

Loctite SF 7387 (also known as Loctite 7387) - IDH 135276, is an activator specifically developed for the curing of Loctite tough acrylic adhesives. It contains substituted dihydropyridine, n-heptane and isopropanol. This product promotes the acceleration of the curing of adhesives on treated surfaces and ensures rapid fixation of joints. Loctite SF 7387 is a clear to amber activator with very low viscosity, ideal for various industrial applications.

Benefits:

• Accelerates the curing of tough acrylic adhesives. viscosity facilitates application.

Technical parameters:

• Technology: Activator for Loctite tough acrylic adhesives
• Chemical type: Substituted dihydropyridine
• Solvent
• Appearance: Translucent yellow to amber liquid
• Viscosity: 1–2 mPa·s at 25 °C
• Specific gravity: 0.8 at 25 °C

Application: Loctite str adhesives, especially in cases where it is necessary to achieve rapid fixation of joints or in applications with large joints. It is suitable for use on clean surfaces where high strength of the bonded joint is required. src='https://cdn.myshoptet.com/usr/www.lepidlatmely.cz/user/documents/upload/katalog-loctite/0067.jpg' width="240" height="169" caption="false" style="border: 1px solid gray;" />

Use for application:

1. Clean surfaces of loose dirt or oxidized layers that may affect curing.
2. Apply activator to one surface, apply adhesive to the other surface.
3. Apply activator to both surfaces.
4. After applying activator, wait 1–5 minutes for the solvent to evaporate, and join surfaces within 15 seconds of applying adhesive.
5. Secure assembly and allow to set.

Storage: The product is highly flammable and must therefore be stored in accordance with the relevant regulations. Store in a dark place at temperatures between 8 °C and 21 °C. Do not expose the product to temperatures outside this range to avoid affecting its properties.

Technical data sheet or safety data sheet Loctite SF 7387 on request