Loctite PC 7257 - 5.54 kg Nordbak Magna Crete quick concrete repair

Product detailed description

Loctite 7257 Nordbak Magna Crete is an excellent antifreeze two-component compound for quick repairs of concrete and plaster surfaces, filling cracks and anchors. After very rapid hardening (at 20 ° C it hardens in about 15 minutes) it offers high strength and toughness. Loctite 7257 is appreciated primarily for its excellent adhesion to the repaired concrete or plaster surface, steel reinforcement and many other materials. The hardening process of the Loctite 7257 mixture does not take place with water, but on the basis of magnesium phosphate, which allows concreting to be carried out even deep below the point. Compared to conventional concrete mixtures, concrete repairs can be carried out even in extreme conditions and the repaired surface has a much longer service life. liquids (except acids), concrete repairs at temperatures from -26 ° C to +46 ° C without the risk of freezing, shrinkage and cracking. The fast-hardening antifreeze concrete repair compound Loctite 7257 Nordbak Magna Crete is prepared in the same way as usual, mixed with a liquid activator and the mixture is poured into the repaired cavity. Loctite 7257 Nordbak Magna Crete enables lightning-fast repairs of concrete dents:
·in 45 minutes, light traffic can be allowed over the repaired surface,·in 120 minutes, a compressive strength of approximately 20 MPa is achieved,·the final strength of the repaired surface is up to 90 MPa.
High-strength repairs of concrete surfaces and dents, such as repairs of airport runways, concrete industrial floors and loading ramps, pouring concrete foundation slabs, concrete pillars and bridge decks or for firmly anchoring railings, barriers or industrial machines in concrete, etc.
Fast delivery and cheap shipping! Buy protective and repair coatings, adhesives and antifreezes for industry at a bargain price from the largest distributor of Loctite products in the Slovak Republic - !
Technical data:
·Particle size: small·Workability time: 3 min
·Curing time: 22 min·Recommended 2 6 mm·Operating temperature: -26 °C to +1,090 °C
·Package size: 5.54 kg, 25.7 kg
Properties:
·Technology: based on magnesium phosphate·Appearance: gray liquid (mix to desired consistency) two-component·Curing: after mixing at room temperature·Application: flooring material and mortar
·Curing in the temperature range from -26 °C to +46 °C
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Loctite 7257 Safety Data Sheet on request.
Not sure about the product selection? We are happy to advise you, contact us!

LOCTITE PC 7257 is a unique two-component, fast-setting system for concrete repairs and joint filling. A highly effective magnesium phosphate-based system, it cures faster than concrete and adheres to new and old concrete as well as most structural materials including wood and steel. Since it does not use water-based additives, this repair system can be applied at almost any temperature.