Loctite LB 8101 - 400 ml chain oil

Product detailed description

Loctite 8101 is an excellent chain oil spray for open machine systems. This adhesive grease offers excellent lubricating properties and provides high resistance to chain wear and high pressure.
Loctite 8101 is used as a highly adhesive oil for lubricating chains, open gears, adjusting screws and cables, where it offers excellent protection against water wetting. Chain oil in spray is easily and quickly applied wherever required:
·reduction of chain wear,
·chain oil in spray with paste viscosity,
·lubricant for chains, gears and open mechanisms,
·chain oil for working temperatures ·protection of chains by lubrication against water penetration and seizing,
·adhesive synthetic chain lubricant with limited splashing,
·oil resistance to centrifugal forces and pressure on high-speed mechanisms.
Using chain oil in spray Loctite 8! Clean the part to be lubricated properly.
2. Shake the aerosol well before use and spray Loctite 8101 oil onto the treated area from a distance of about 15 to 20 cm in an appropriate amount.
Fast delivery and cheap shipping! Buy top-quality chain lubricants and oils for all industrial applications at the largest distributor of Loctite products in the Czech Republic - !
Technical data:
Temperature range: -25 to +170 °C
Dropping point of lubricant: 190 °C
Paste Thickener: lithium soap
NLGI grade: 2
Properties:
Technology: oil and lubricant
Chemical type: doped mineral oil, lithium soap and EP additives
Appearance: amber
/> Odor: oily
Curing: non-hardening Propellant: carbon dioxide Application: lubrication Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Loctite 8101 safety data sheet on request.
Not sure about the product selection? We are happy to advise you, contact us!

• Clean the bonded parts thoroughly with ERGO 9190 cleaner, 500 ml pack or
  LOCTITE LB 8101 is a special grease for open mechanical systems. It is used to lubricate chains, open gears, adjusting screws and cables and protects against water ingress. It also offers excellent wear and high pressure resistance. This product also withstands centrifugal forces in high-speed mechanisms. The product is typically used at operating temperatures of -30 to +170 °C.