Loctite Frekote B 15 - 1 L penetrating coating

Product detailed description

Loctite Frekote B-15 (IDH 381021 / FK5150L01A) is a porous mold filler, specifically designed for use with metal and epoxy molds. This product is designed to seal porous areas and fill shallow scratches or surface imperfections. It serves as a primer that significantly improves the adhesion and release properties of mold release agents used in molding and forming.

Technical parameters:

• Chemical type: Solvent-based filler
• Application temperature: 15 - 60 °C
• Thermal stability: Up to 315 °C
• Curing time at room temperature: 24 hours
• Shortened cure at 100 °C: 15 minutes
• Number of coats: minutes before applying the next one

Application: Loctite Frekote B-15 is ideal for metal and epoxy molds where it is necessary to fill surface porous defects or scratches. It is used primarily in applications involving the pressing of composite materials, metals or plastics. It is used as a primer, which significantly improves the effectiveness of release agents, thus ensuring clean demolding and longer mold life. thermal load

Use for application:

• Apply an even thin layer to the clean surface of the mold by spraying, brushing.
• Apply a minimum of 2 coats with a drying time of 30 minutes between coats.
• Final cure takes 24 hours at room temperature, or the curing time can be reduced to 15 minutes at 100 °C.

Recommended products for application

Surface preparation: Before applying Frekote release agents, thoroughly clean the mold with Loctite Frekote PMC . This universal cleaner reliably removes wax and other contamination from the surface without scratching or dulling it. The use of Frekote PMC will increase the efficiency of the separation and ensure long-term protection of the mold. 7850 , which is suitable for effective hand cleaning. This biodegradable cleaner removes oils, grease and other dirt.