Loctite EA 9466 - 400 ml two-component tough epoxy

Product detailed description

Loctite Hysol 9466 is a high-performance, chemical and solvent resistant, two-part, tough epoxy adhesive with an extended pot life of 60 minutes, making it ideal for industrial structural bonding of metals and plastics where sufficient time is required for proper set-up or re-adjustment. After curing, Hysol offers strong and tough bonding of steel, stainless steel, aluminum, glass, brass, copper, wood and most industrial plastics.
Loctite 9466 Hysol epoxy is an excellent medium viscosity adhesive that finds wide application due to its specific properties epoxy,
·excellent electrical insulator,·ability to fill larger joints,·flexible bonding with extended curing time,·toughness and excellent high load transfer,
·high resistance to peeling and high shear strength.
How to use two-component6 Professional application can be achieved using an application gun and a static mixer. Unless Loctite 9466 is applied in industrial series use, the gun replaces the cartridge adapter. Attention! The static mixer is for single use only, so stock up on mixers in time. It is very important to adhere to the weight or volume mixing ratio! Hysol Loctite 9466 will begin to cure after thorough mixing of both components depending on the ambient temperature, higher temperatures accelerate curing. The Loctite 9466 package contains: 1x 50 ml cartridge of adhesive 1x static mixer (single use only) of the day! Buy tough and chemically resistant two-component epoxies at a discount from the largest distributor of Loctite products in the Slovak Republic - !
Features:
·Applied with an application gun no. 96001 or using an adapter for 50 ml double cartridges 2:1 · Supplied in packages: 50ml, 400ml and on request also 2x1 kg · Pot life of the mixed mixture: 60 min
2: 1
· Mixing ratio by weight - resin: hardener 100: 50· Application: flexible bondingPhysical properties:
· Temperature resistance: -55 °C to 120 °C
· Tensile strength: 32 N/mm2
· Viscosity - 30 Pa.s· Peel resistance: 8 N/mm
Very good for bonding (shear strength):
· Steel - 37.0 N/mm2
· Aluminum: 17 - 26 N/mm N/mm2
·Polycarbonate - 5.3 N/mm2
·Nylon - 1.6 N/mm2·Wood - 11.3 N/mm2·Fiberglass - 5.0 N/mm2
·ABS - 4.7 N/mm2
Assembly and disassembly instructions Loctite 9466 safety data sheet on request.
Not sure about the product selection? We will be happy to advise you, contact us!

LOCTITE EA 9466 is a 2-component, yellowish epoxy structural adhesive that cures at room temperature, cures at room temperature, cures at room temperature, cures at room temperature. shear strength. It is designed for applications that require extended pot life and high bond strength. It is resistant to a wide range of chemicals and solvents and also acts as an excellent electrical insulator