Loctite EA 3463 - 114 g Metal Magic Kneading Epoxy
Code: 981152
Related products
Product detailed description
Loctite EA 3463 (also known as Loctite 3463) - IDH 265628 is a versatile, two-component, easy-to-use, steel-filled epoxy sealant. Once cured, it has high compressive strength and good adhesion to most surfaces. welds and repairs non-structural defects in cast tank openings.
Potency time 3 minutes, sets within 10 minutes. Steel-filled kneadable sealant stick Ideal for emergency sealing of tank and pipe leaks. Thanks to its compressive strength and good adhesion, it is suitable for subsequent mechanical processing.
This product:
- Also available in 50g and 114g packages.
- Potency of the mixed mixture: 3 min.
- Cures underwater and has adhesion to most wet surfaces.
- Imperfections).
Physical properties:
- Temperature resistance: -55°C to 120°C
- Tensile strength 17.2 N/mm2
- Peel resistance 6.8 N/mm
Properties:
- Technology: Epoxy
- Appearance: Metallic black
- Ingredients: two-component
- Application: Bonding
- Mixing ratio volume - resin weight ratio - resin: hardener 100: 100
Instructions for use:
- Do not apply to surfaces heated above 66 °C.
- Clean and dry the surface if possible. product, remove the plastic wrap and knead thoroughly in your hand until it is a uniform gray-black color.
- Press firmly into the patch, repair or joint.
- You can smooth it with a damp cloth or finger to obtain a smooth surface.
Loctite 3463 - 114 g
Pot life 3 minutes, sets within 10 minutes. chemical attack and corrosion. It can be drilled, filled and painted. Ideal for emergency sealing of leaks from tanks and pipes. copper, brass
- For joints up to 1 mm
- This product:
- Also available in 50g and 114g packs.
- Pot life of mixed mixture: 3 min
- It cures below the surface and has adhesion <. within 10 minutes for quick repairs (cracks and unevenness).
- Temperature resistance: -55 °C to 120 °C
- Tensile strength 17.2 N/mm2
- Peel resistance 6.6 70
- Technology: Epoxy
- Appearance: Metallic black
- Ingredients: two-component
- Application: Bonding
- Mixing ratio by volume - resin:
- 1: hardener 1 resin: hardener 100: 100
You can find this product in the following categories
Repairs metal repairs - two-component epoxy, kneadable
Technical data
- Potency time: 3 min.
- Handling strength in 10 min.
- Shear strength (GBMS): &li> 82.7 N/mm?
- Operating temperature: -30 °C to +120 °C
- Pack size: 50g, 114g
LOCTITE® steel-filled epoxy repair sealant. Applied as a sealant, it exhibits high compressive strength and good adhesion to most surfaces after curing. -30 to +121 °C.
LOCTITE EA 3463
Structural bonding - two-component epoxy. Steel-filled, emergency repair compound.
LOCTITE® EA 3463 is a versatile, two-component, easy-to-use, steel-filled epoxy repair compound. It is applied as a sealant and, when cured, exhibits high compressive strength and good adhesion to most surfaces. The product is used to seal leaks in pipes and tanks, fill oversized bolt holes, smooth welds and repair non-structural defects in castings or tank holes. This product is typically used in service temperatures of -30 to +121 °C.
Additional parameters
| Category: | Adhesives and sealants > Epoxy glues > According to the glued material > Aluminium |
|---|---|
| Weight: | 0.12 kg |
| EAN: | 5010266319834 |
| Color: | black |
| Country of origin: | Ireland |
| Handling strength per (min): | 10 |
| Manufacturer's brand: | Loctite |
| Maximum temperature °C: | +120 |
| Minimum temperature °C: | -30 |
| Processing time (min): | 3 |
| Product: | epoxy glue |
| Shear strength (N/mm2): | 6 |
| Číslo výrobce: | 265628 |
| Značení: | LOCTITE EA 3463, 114g |
Be the first who will post an article to this item!