Loctite AA 319 - 0.5 ml rear-view mirror adhesive

Product detailed description

Loctite 319 is a special adhesive for bonding and repairing rear-view mirrors by directly bonding the rear-view mirror holder from metal to glass (Glass-Metall set). This excellent but inexpensive adhesive compensates for different thermal expansions and is therefore also ideal for other car repairs: bonding metal levers and hinges on revolving windows, mounting a radio or telephone antenna on glass, etc., where it is necessary to bond metal and glass. metal,
·short fixation time (only about 30 seconds),
·adhesive set - tube with adhesive + pad with activator on a blister.
Everything for body repairs, bonding glass to metal and sealing. Buy the Loctite 319 rearview mirror adhesive set from specialists in the e-shop, starting from just one piece!
Technical parameters:
·Specific gravity at 25 °C: 1.1
·Flash point: see safety data sheet·Viscosity: RVT, 25 Properties:
·Technology: acrylate
·Chemical type: modified acrylate ester·Appearance (uncured): clear light amber liquid·Ingredients: single-component·Viscosity: medium·Curing: anaerobic with activator·Curing temperature: curing: curing: Loctite 319:
·Use the adhesive only at temperatures between 15 °C and 25 °C, otherwise there is a risk of damage caused by thermal expansion of the windshield.
·Cut the pad to the shape of the rearview mirror base or antenna - do not touch contact surfaces with your fingers. removable) from the mirror holder and mark the exact position of the mirror/antenna on the opposite side of the window.
·Remove the old adhesive on the window and the mirror/foot with a razor blade or knife and ensure that the surface is clean, dry and free of grease.
Apply them evenly to the entire contact surface of the foot. The recommended joint size is 0.1 mm. If the joint is larger (maximum up to 0.5 mm), or faster curing is required, activator 7649 should be applied to both surfaces. The parts must then be assembled immediately (within 1 minute).
·Place the activator pad on the contact surface of the foot with the adhesive.
·Make sure that the foot is in the correct position and immediately place it on the previously marked place on the windshield.
·Fix. Excess product can be wiped up with an organic solvent. Allow the adhesive to cure for a minimum of 15 minutes. Full strength is achieved 24 to 72 hours after assembly (depending on joint size, material and environmental conditions). Loctite 319 cures in the joint between the bonded surfaces with the aid of Activator 7649. Henkel - Loctite 319 - Rearview Mirror Repair LOCTITE AA 319 is a one-component acrylic adhesive that offers structural bonding for materials such as glass, metals, ceramics. Typical applications include the bonding of rearview mirrors. It compensates for differential thermal expansion of the components. An activator should be used to ensure fast and reliable cure.