Loctite 460 - 20 g instant glue
Code: 981020
Related products
Product detailed description
Loctite 460 Instant Adhesive is a low odor, limited bloom product designed for applications where vapor control is difficult. This product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. Loctite 460 is primarily designed for bonding porous and absorbent materials such as wood, paper, leather and fabrics. After curing, it has a perfect appearance, the adhesive is non-sag. Increased moisture resistance. No irritation label.
Technical parameters:
- Also available in packages: 20g, 500g
- Viscosity: 40 [mPa.s]
- Maximum joint: 0.10 [mm] [°C]
- Bonded material: steel, aluminum, zinc dichromate, neoprene, rubber, nitrile, ABS, PVC, polycarbonate, phenol, wood and others.
Handling shear strength [N/mm2]: 26
Fixation speed [s]:
- On steel in: 240 - 300 l of polycarbonate for: 15 - 25
Properties:
- Technology: cyanoacrylate
- Appearance: transparent, clear to straw yellow liquid
- Ingredients: single-component
- Curing: moisture
- Application: bonding
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Loctite 460 safety data sheet available on request.
Henkel - Loctite 460 - IDH: 1437101
The high-performance instant adhesive Loctite 460 is a superior adhesive for plastics and rubber (wood, paper, leather, cork and fabrics), but also allows for rapid bonding of metals and elastomers. The advantage of this low-viscosity cyanoacrylate is its low odor during use and its limited blooming after curing. This makes Loctite 460 suitable for applications where vapor control is difficult and where appearance is important, such as bonding transparent and decorative objects. It is suitable for manufacturing or repair in a number of industrial areas such as electronics and automation. It enables rapid bonding of a wide range of materials including metals, plastics and elastomers (e.g. steel, aluminium, zinc, neoprene, rubber, nitrile, ABS, PVC, polycarbonate, phenolic, wood and others).
Not used:
- in rich systems and should not be used to seal chlorine or other strongly oxidizing materials.
For the best bonding result, the bonded surfaces should be clean and degreased. To accelerate the curing (due to the large gap between the bonded parts), it is recommended to use a suitable Loctite activator. However, this may cause a reduction in the final strength of the bonded joint (test necessary to verify the result). yellow liquid
Benefits for you
- For applications where appearance is important and low efflorescence is required
- Low odor during use
- For porous materials, For porous materials
Technical data
- Handling strength in: 5 - 20 seconds.
- Colour: colourless, transparent
- Viscosity in MPa.s: 40
- Operating temperature: -40 °C up to +80 500g
| Applications | Adhesives > Industrial Bonding > Instant – low odor / low overlap |
| Chemistry | Cyanoacrylate |
Secondary low odor, low viscosity
Benefits for you
- For applications where appearance is important and low efflorescence is required
- Low odor during use
- For porous materials such as wood, paper, leather, cork and fabrics data
- Handling strength in: 5 - 20 s.
- Colour: colourless, transparent
- Viscosity in MPa.s: 40
- Operating temperature: -40 °C to +80 °C 0
| Chemicals | Cyanoacrylate |
LOCTITE® 460 alkoxyethyl with low viscosity, low odor and limited efflorescence, provides fast bonding (5-20 sec.) of a wide range of materials including metals, plastics and elastomers. It is particularly suitable for applications where vapor control is difficult and is very suitable for bonding porous and absorbent materials.
LOCTITE 460A low-odor, low-bloom, low-viscosity, alkoxyethyl-based instant adhesive. Particularly suitable for absorbent surfaces.LOCTITE® 460 is a transparent, colorless, low-viscosity, low-odor, limited-bloom, alkoxyethyl-based adhesive that provides rapid bonding (5-20 sec.) of a wide range of materials including metals, plastics and elastomers. It is particularly suitable for applications where vapor control is difficult and is very suitable for bonding porous and absorbent materials.Additional parameters
| Category: | Adhesives and sealants > Instant glues > According to the glued material > Plastics and rubbers |
|---|---|
| Weight: | 0.032 kg |
| EAN: | 9002010002495 |
| Color: | clear: ultra clear |
| Country of origin: | Ireland |
| Manufacturer's brand: | Loctite |
| Maximum temperature °C: | +80 |
| Minimum temperature °C: | -40 |
| Product: | superglue |
| Číslo výrobce: | 1922762 |
| Značení: | LOCTITE 460, 20G |
| Typ: | Alkoxyetyl |
Be the first who will post an article to this item!