Loctite 4304 - 20 g UV instant glue
Code: 981249
Related products
Product detailed description
Loctite 4304 is designed for use in applications requiring very short set times, joint and bare surface cure. Its UV curing capability facilitates rapid cure of the product on exposed surface areas. It has limited efflorescence and provides an alternative to the use of soluble activators. Loctite 4304 is suitable for bonding single-use medical devices.
Technical parameters:
- Viscosity: 20 [mPa.s]
- Maximum joint: 0.20 [mm]
- Tli
- Bonded material: steel, aluminum, zinc dichromate, neoprene, rubber, nitrile, ABS, PVC, polycarbonate, and others.
Manipulation shear strength [N/mm2]:
- At 34
- On polycarbonate in: 19
Fixation speed [s]:
- On steel in: 30 - 45
- On ABS in: 5 - 10 n
- On polycarbonate in: 5
Properties:
- Technology: cyanoacrylate
- Appearance: transparent, light yellow-green to dark blue-green liquid
- Ingredients: one-component
- Viscosity: low visible light
- Secondary curing: moisture
- Application: bonding
- Intended primarily for: plastics, rubber and metals
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Loctite 4304 Safety Data Sheet on request.
Henkel - Loctite 4304 - IDH: 303385 - Catalogue number: 32254
It has limited efflorescence and at the same time provides an alternative to the use of soluble activators. Loctite 4304 is suitable for bonding single-use medical devices.
Technical parameters:
- Viscosity: 20 [mPa.s]
- Maximum joint: 0.20 [mm]
- Temperature resistance: - 4 material: steel, aluminum, zinc dichromate, neoprene, rubber, nitrile, ABS, PVC, polycarbonate and others.
- On steel: 18
- On ABS: 19
- On steel: 30 - 45
- On ABS: 5 - 10
- On polycarbonate: 10 - 20
You can find this product in the following categories
- Adhesives and sealants
- UV adhesives
- Adhesives and sealants Instant adhesives
- By material bonded
- Plastics and rubbers
- . target="_blank" rel="noopener noreferrer">Adhesives and sealants
- Instant adhesives By bonded material
- Acidic surfaces
- Adhesives and sealants
- Instant adhesives
- Li temperature resistance Up to 80 °C
- Instant adhesives
- By joint properties
- Moisture resistant Adhesives and sealants
- By viscosity
- Up to 40 Pa.s
- Adhesives and sealants Instant adhesives
- Other
Loctite 4304 light-cured adhesive - high strength, high adhesion to plastics, curing at low intensity, ISO 10993 certification
Technical data
LOCTITE® 4304 is a radiation-cured, low-intensity curing adhesive. The product offers rapid handling strength in 2 seconds and tack-free in less than 5 seconds. It also cures in joints using surface moisture and can be used to bond non-plastic materials such as metals, ceramics and paper.
LOCTITE 4304A radiation-curing cyanoacrylate adhesive providing high adhesion to plastics. Rapidly achieves handling strength and tack-free. Cures in joints and surface moisture moisture.LOCTITE® 4304 is a radiation-curing cyanoacrylate adhesive offering high adhesion to plastics and low-intensity cure. The product offers rapid handling strength in 2 sec. and tack-free in less than 5 sec. It also cures in joints using surface moisture and can be used to bond non-plastic materials such as metals, ceramics and paper.Additional parameters
| Category: | Adhesives and sealants > Instant glues > According to the glued material > Plastics and rubbers |
|---|---|
| Weight: | 0.042 kg |
| Country of origin: | USA |
| Manufacturer's brand: | Loctite |
| Maximum temperature °C: | +100 |
| Minimum temperature °C: | -40 |
| Product: | superglue |
| Číslo výrobce: | 456606 |
| Značení: | LOCTITE AA 4304, 20g |
| Typ: | Kyanoakrylát |
Be the first who will post an article to this item!