Loctite 414 - 50 g instant glue

The curing speed depends on the material, ambient relative humidity and joint size. In a small joint, the product cures at a high rate; increasing the joint size results in a decrease in the curing speed. This product performs best when bonding small gaps (up to 0.05 mm).

Not recommended:

• Use in pure oxygen or oxygen-rich systems and should not be used to seal chlorine or other strongly oxidizing materials
Bonded surfaces clean and degreased.

To accelerate curing (due to the large gap between the bonded parts), it is recommended to use a suitable activator. However, this may reduce the final strength of the bonded joint (test required to verify the result). (uncured): transparent, clear to straw yellow liquid

• Ingredients: single-component
• Viscosity: low
• Curing: moisture
• Application: bonding
• Temperature resistance: - 40 + clear="all" />

  Loctite 414 instant adhesive - universal, low viscosity

  
  
  

  LOCTITE® 414 is a colorless to straw colored, transparent, universal liquid instant adhesive (cyanoa). Suitable for plastics, rubbers and metals. Handling strength is achieved in 2 - 10 seconds.

  
  
  LOCTITE 414
  Transparent, colorless, low viscosity ethyl-based instant adhesive. Suitable for plastics, rubber and metals.
  LOCTITE® 414 is a colorless to straw-colored, transparent, universal liquid instant (cyanoacrylate) adhesive based on ethyl. Suitable for plastics, rubber and metals. Handling strength is achieved in 2 - 10 seconds.