Loctite 406 - 20 g + 770 - 10 g set for polyolefins
Code: 981011
Related products
Product detailed description
Set for bonding plastics from the polyolefin group (polyethylene, polypropylene, etc.)
Loctite 406 is primarily intended for plastics, rubbers (including EPDM, SBR, NBR, PE, PP, PTFE) and very many. It allows for high bond strength - the bond is often stronger than the bonded material. PTFE and thermoplastic rubber materials. Primer for polyolefins is not recommended for use in assemblies where high peel strength is required.
Instructions for assembly, disassembly and cleaning can be found in the product data sheet. Safety data sheet Loctite 406 + 770 on request. instant adhesive Loctite 406 and primer 770.
The instant adhesive Loctite 406 is primarily intended for plastics and elastomers, rubber where it is required very often. difficult-to-bond materials. Loctite 406 is such a powerful instant adhesive that the bonded joint is often stronger than the bonded material itself.
Lower humidity leads to slower curing, higher humidity will accelerate curing, but may have a negative effect on the resulting bond strength. polyethylene PE, polypropylene PP, polytetrafluoroethylene PTFE and thermoplastic rubber materials Primer is not recommended for use in assemblies where high peel strength is required. be used to seal chlorine or other strongly oxidizing materials.
For the best bonding results, the bonded surfaces should be clean and degreased.
To improve bonding results on plastics with low surface tension, it is advisable to use Loctite 770 or 723 primer on the bonded surfaces. (between the bonded parts) it is recommended to use a suitable Loctite activator. However, this may cause a reduction in the final strength of the glued joint (test required to verify the result).
Properties:
- Technology: cyanoacrylate
- Appearance (uncured): transparent, clear to straw yellow liquid
- Ingredients: single-component
- Viscosity: low
- Application: bonding
- Temperature resistance: - 40 to + 80 °C
Loctite 406 instant adhesive - low viscosity, for plastic and rubber
Benefits for you
- °C!
- Fast bonding of plastics, rubber (including EPDM) and elastomers
- Loctite 770 or Loctite 7239 primer for polyolefins improve results when bonding difficult-to-bond materials
More information
>
| Adhesives >Industrial Bonding > Instant - universal | ||||||||||||||||||||||||
| Application | Adhesives > Instant - Universal |
LOCTITE® 406/LOCTITE®SF 770 KIT is a two-part kit, LOCTITE 406 is designed for bonding plastic and elastomer materials where fast cure is required, and LOCTITE SF 7 surfaces with low surface tension prior to bonding with Loctite cyanoacrylate adhesives. Remember: technical information regarding these products can be found on the LOCTITE® 406 and LOCTITE® SF 770 product pages.
Additional parameters
| Category: | Adhesives and sealants > Instant glues > According to the glued material > Plastics and rubbers |
|---|---|
| Weight: | 0.111 kg |
| EAN: | 4058093036365 |
| Country of origin: | Netherlands |
| Manufacturer's brand: | Loctite |
| Maximum temperature °C: | +120 |
| Minimum temperature °C: | -40 |
| Product: | superglue |
| Viscosity: | 20 mPa.s |
| Číslo výrobce: | 2732334 |
| Značení: | LOCTITE 406/SF770 20G/10ML DE/ |
Be the first who will post an article to this item!