Ergo 5150 - 10 ml primer for instant adhesives

Product detailed description

Ergo Primer 5150

Ergo Primer 5150 is a solvent-based product developed for the treatment of non-polar surfaces such as polyethylene, polypropylene or PTFE to enable these materials to be bonded using Ergo cyanoacrylates in a wide range of heavy strengths. plastics.

Benefits:

• Increases adhesion properties on non-polar surfaces.
• Enables effective bonding of difficult-to-bond plastics.
• Quick and easy to use.
• Improves tensile bond strength in plastics.

Technical parameters:

• Chemical type: Aliphatic solvent
• Colour: Clear/colourless
• Viscosity: < 20 mPas
• Density: 0.68 g/cm (DIN 55213)
• Shelf life: 12 months at room temperature

Application:

Ergo Primer 5150 is ideal for use in industrial applications where non-polar plastics such as polyethylene, polypropylene. electronics.

Typical properties:

Before curing:

After curing:

It is recommended to use a wet gauze or brush to evenly apply the primer to the surface.

Instructions for use:

1. Apply the primer using a wet gauze or brush 2x.

   3. If only one part is made of non-polar material, treat only the difficult surface.

   4. Apply the adhesive to the untreated surface.

   5. Apply the adhesive within 20 minutes and join the parts together.

   Packaging:

   Ergo Primer 5150 is available in various pack sizes to suit the needs of different applications.

   Storage:

   Store at room temperature in a dry and well-ventilated place. Keep away from heat sources and open flames.