Ergo 5100 - 150 ml activator for instant glues

Product detailed description

Ergo 5100

Ergo 5100 is a highly effective accelerator for cyanoacrylate adhesives, designed to accelerate the curing process. Curing The product is applied to one side of the joint at least two minutes before applying the adhesive to achieve maximum strength. It is necessary for the solvent to evaporate completely before applying the adhesive. curing.

Advantages:

• Fast curing within seconds
• Suitable for inactive materials and large gaps
• Ensures complete curing on large areas
• Easy application to one side of the joint
parameters:
• Chemical type: amines dissolved in aliphatic solvent
• Colour: colourless
• Viscosity: aerosol, undetermined
• Density: 0.7 g/cm? at 20°C
• aerosol
• Evaporation time: 60 – 120 seconds (depending on temperature)
• Initial strength on aluminium strips (100x25x2mm): < 2 seconds (with Ergo 5300, at 20°C)
• Functional strength strength: 12 hours
• Storage life: at least 1 year at room temperature

Application:

Ergo 5100 is best suited for use in situations where fast curing is required, for example when bonding metal parts, in the filter industry for bonding metal parts, in the gap filter industry.

Typical properties:

• Before curing: Colorless aerosol with fast evaporation time
• After Curing: Reduces final strength by approximately 20% compared to normal values of standard aerosol applicators.

  Instructions for use:

  1. Apply Ergo 5100 to one side of the joint at least two minutes before applying the adhesive.

     2. Apply adhesive to the untreated part of the joint.

     4. If necessary, apply Ergo 5100 to excess adhesive or large open areas to ensure complete curing.

     Packaging:

     Ergo 5100 is available in aerosol cans.

     Storage:

     The product should be stored at room temperature to maintain its properties for at least one year.

     Technical data sheet or safety data sheet for Ergo 5100 on request.