Ergo 4460 - 250 g high temperature joint fixer

Product detailed description

Ergo 4460

Ergo 4460 is a highly resistant retention agent for cylindrical joint fixing with excellent resistance to temperatures, acids, alkalis and water. This product is ideal for applications where high thermal resistance and bond strength are required. It complies with the German Federal Environment Agency guideline of February 11, 2016 for use in contact with drinking water. in contact with drinking water

Technical parameters:

• Chemical basis: Methacrylic acid diester
• Colour: Green
• Viscosity (Brookfield RVT at Brookfield RVT 10,000 – 16,000 mPas
• Density at 25°C: 1.10 g/cm?
• Maximum thread diameter: M36
• Maximum gap filling: 0.20 mm
• Flash point: > 90°C: 25°C

Application:

Ergo 4460 is ideal for fastening cylindrical joints in industrial applications such as engines, gearboxes and other mechanical assemblies. It is suitable for use in the automotive industry, in mechanical engineering and in the manufacture of equipment where high strength and resistance to temperatures and chemicals are required. 24 hours

Use for application:

For optimal application of the product, it is recommended to use a standard dispensing device for adhesives and sealants.

Instructions for use:

1. Clean the surface thoroughly before application. Apply Ergo 4460 evenly to one of the surfaces.

   3. Join the parts and secure them in the desired position until the initial curing.

   4. Allow the product to cure for the time specified in the technical specifications to achieve final strength. 4460 is available in a variety of package sizes, including smaller tubes and larger industrial packages, to suit different application needs.

   Storage:

   Store the product in a dry and cool environment at a temperature of ? 25°C, away from direct sunlight, to maintain its properties for one year. 4460 on request.