Ergo 4202 - 250 g threaded seal for SP hydraulics

Product detailed description

Ergo 4202 - Hydraulic Sealing

Ergo 4202 is a medium strength product designed to seal cylindrical and tapered threaded connections up to ¼ inch in size. This product provides excellent resistance to industrial hydraulic fluids and lubricants, making it ideal for applications requiring high pressure resistance up to burst pressure levels. inches.

Technical parameters:

• Chemical base: Methacrylic acid diester Brown/fluorescent
• Viscosity: 450 – 700 mPas (measured at 25°C, Brookfield RVT, spindle 2, 20 rpm)
• Density: 1.05 g/cm? (at 25°C)
• Maximum
• Maximum gap: 0.15 mm Flash point: > 100°C Shelf life: 1 year at room temperature Application: Ergo 4202 is ideal for use in hydraulic systems where high hydraulic system is required. Typical applications include industrial hydraulic systems, automotive and other areas where high pressure and fluid resistance is required. in 10 20 minutes, functional strength in 1 3 hours, final strength in 3 6 hours. 54452.

Use for application:

It is recommended to use standard thread sealant application tools such as brushes or special dispensing guns.

Instructions for use:

< surfaces to be sealed.

2. Apply an even layer of Ergo 4202 to the threaded joints.

3. Assemble the parts and tighten to the recommended torque.

4. Allow to cure for at least 1 to 3 hours to achieve functional strength.

Standards and certifications:

1. Strength tests according to DIN 54454 and DIN 54452.

Packaging: various applications.

Storage:

Store at room temperature, away from direct sunlight and heat sources, to maintain maximum product effectiveness for 1 year.

Technical data sheet or safety data sheet Ergo 4202 on request.