Pattex Express Fix PL600 - 375 g
Code: 981565
Related products
Product detailed description
Pattex Express Fix PL600 is suitable for bonding indoors and outdoors, where high bond strength is required. Suitable for both absorbent and non-absorbent materials. class="textimage-text">
Properties:
- High initial adhesion
- For absorbent and non-absorbent materials
- For interior and exterior
- High final strength
- Solvent-based
Areas of use:
- Wood
- Bricks
- Stone
- Concrete
- Gypsumboard
- Plywood
- MDF
- PVC
- Plastics
To prevent the glue from spreading too much over the surface when pressing the object to be glued, try inserting a toothpick into the glue strip in several places. are materials that allow the passage of gases and liquids, either completely or partially (e.g. wood, cork, etc.) Non-porous materials do not allow the passage of any substances (e.g. glass, metals, plastics, etc.)
1. The glued surface must be clean, dry, free of dust and grease.
2. When using a cartridge, cut the tip of the cartridge above the screw thread, screw on the plastic nozzle and cut the nozzle at an angle. Then insert the cartridge into the gun.
6. The joint reaches its final strength after 48 hours at a temperature of +5 °C to +25 °C.
Additional parameters
| Category: | Adhesives and sealants > Assembly glues |
|---|---|
| Weight: | 0.38 kg |
| EAN: | 3178040820593 |
| Manufacturer's brand: | Pattex |
Discussion
Be the first who will post an article to this item!