Den Braven Cured PUR Foam Remover - 100 ml can _40410BD

Product detailed description

For removing the remains of hardened PUR foam from aluminium surfaces, PVC and coated PVC. The cap is equipped with an application brush. Before application, it is advisable to remove as much PUR foam as possible from the surface mechanically by cutting, and only then apply the Remover. Application procedure: First remove the hardened PUR foam mechanically, e.g. by cutting just above the sprayed surface. Apply the remover with an application brush. Leave to act for approx. 30 minutes on PVC surfaces and up to 2 hours on aluminium. The softened foam from the surface treated in this way must be removed with a suitable soft brush, synthetic wool or plastic spatula. Do not add any water to the treated surface! Clean the surface with a dry cloth. If all PUR foam remains are not removed, repeat the procedure. After the foam has been completely removed, clean the frames with a damp cloth. The product may be aggressive to the substrate if left for a long time. biodegradable (WGK1)

Almost odorless, free of aromatic hydrocarbons

order number	packaging	volume	number of pieces in a carton	EAN
40410BD	ml	24 pcs	8595100123213