Ceresit CP 30 Aquablock bucket - 5 kg gray

Product detailed description

CP 30 Aquablock

CP 30 Aquablock is a one-component, elastic silicone-rubber thick-film roof sealant that is ready for immediate use. This product is designed for jointless surface protection, crack coverage and roof sealing. It is ideal for reconstruction and repair of leaky joints and pipe penetrations. Approved according to ETAG 005, CP 30 Aquablock provides reliable protection against UV radiation and weathering. temperatures

Technical parameters:

Application:

CP 30 Aquablock is suitable for use on mineral surfaces (concrete, leveling tiles), bitumen surfaces (roofing and coatings), acrylic roof coatings, metals (copper, zinc, aluminum, stainless steel, brass), plastics (connections of ventilation pipes, sewer pipes, roof window frames), thermal insulation OSB, plywood). Also suitable for flat roofs at a layer thickness of 2 mm after drying.

Typical properties:

Use for application:

For optimal application, we recommend using a brush, roller, brush or airless spray.

Coverage: wet layers.

Instructions for use:

1. Prepare the substrate: it must be solid, clean, free of substances affecting adhesion, dry or slightly damp.

2. Apply Ceresit CP 29 Aquablock Primer primer to the recommended surfaces.

3. Apply CP 30 Aquablock by brush, roller or spray.

4. Apply a layer with a thickness of 1.0–1.5 mm for UV protection.

5. Apply in two steps to joints and seams of bitumen roofing.

6. After complete drying, additional walkways can be created.

Standards and certifications: